View LXCL-EL05_8246769.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

features ? high fux density with compact light emitting source ? off-state white appearance ? rated 1.5 a max pulse current ? tight correlated color temperature control ? pb free / rohs compliant ? msl (moisture sensitivity level) class 1 rating benefts ? enables effcient illuminating optics with compact footprint ? aesthetically pleasing for device industrial design ? enables maximum utilization of output capabilities ? ensures consistency in system color point ? free of hazardous materials ? indefnite shelf life * * per ipc/jedec j-std-20 msl classifcations luxeon flash 5 ds119 ?2013 philips lumileds lighting company. introduction luxeon ? flash 5 is a family of ultra-compact leds specifcally designed and tested for use as a camera fash in space-constrained and portable digital imaging applications. luxeon flash emitters are designed with innovative luxeon technology to provide industry-leading intensity and uniformity. the uniquely bright source density characteristics of luxeon flash products put more light on scene, enabling higher quality pictures in low ambient lighting conditions at greater distances. portable imaging devices including camera-equipped smart phones, tablets and digital still cameras can easily incorporate the slim form factor of the luxeon flash into sleek designs while maintaining high levels of light output. the compact and well-defned light source geometry of luxeon flash 5 leds allows their light to be easily coupled into secondary optics or integrated into a stand-alone camera flash module so that time-to-market can be accelerated with simplifed designs. an integrated transient voltage suppression (tvs) chip provides esd protection up to 8kv. luxeon flash 5 power light source LXCL-EL05
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. i table of contents general information 2 ordering information 2 environmental compliance 2 product performance and characterization guide 3 electrical characteristics 3 absolute maximum ratings 4 jedec moisture sensitivity 4 forward current characteristics 5 refow soldering temperature profle 6 mechanical dimensions 7 circuit diagram 7 solder pad design 8 typical relative spectral distribution vs wavelength 9 typical relative radiation pattern 9 typical light output characteristics 10 typical forward voltage characteristics 11 cct shift vs forward current 12 color specifcations 13 chromaticity coordinate shift vs forward current 14 color over angle 14 emitter pocket tape packaging 15 emitter reel packaging 15
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 2 general information ordering information part number description package quantity LXCL-EL05-xxxx luxeon flash 5 emitter, off-state white, on-state cool-white, 1mm 2 die size 5000 environmental compliance philips lumileds is committed to providing environmentally friendly products to the solid-state lighting market. luxeon flash is compliant to the european union directives on the restriction of hazardous substances in electronic equipment, namely the rohs and reach directives. philips lumileds will not intentionally add the following restricted material to the luxeon flash: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (pbb) or polybrominated diphenyl ethers (pbde).
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 3 product performance and characterization guide optical characteristics table 1. part number luminous flux 2 (lm) color temperature 3 (cct) typical viewing angle 4 (degrees) min, ty p min ty p max 2 u 1/2 LXCL-EL05-xxxx 200 240 5000 5500 6000 120 notes for table 1: 1. electro-optical testing conducted in single pulse mode, t = 20 ms, t j = 25c, i f = 1000 ma. 2. philips lumileds maintains a tester tolerance of 10% on luminous fux measurements. 3. philips lumileds maintains a tester tolerance of 5% on cct measurements. 4. viewing angle is the off axis angle from led centerline where the luminous intensity is ? of the peak value. electrical characteristics table 2. part number forward voltage v f [2] (v) typical temperature coeffcient of forward voltage [3] (mv/c) d v f / d t j typical thermal resistance junction to thermal pad (c/w) r u j-c typical dynamic resistance [4] (w) d v f / d i f minimum typical maximum LXCL-EL05-xxxx 2.7 3.2 3.6 -2 10 0.17 notes for table 2: 1. electro-optical testing conducted in single pulse mode, t = 20 ms, t j = 25c, i f = 1000 ma. 2. philips lumileds maintains a tolerance of 0.06v on forward voltage measurements. 3. measured between t j = 25?c and t j = 85?c at i = 1000 ma. 4. dynamic resistance is the inverse of the slope in the i vs. v curve and is measured at i = 1000 ma (see figure 11).
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 4 absolute maximum ratings table 3. parameter luxeon flash 5 dc (torch mode) forward current 500 ma peak pulsed (flash mode) forward current [1] 1500 ma esd sensitivity 8000v human body model (hbm) class 3b jesd22-a114 500v charged-device model (cdm) class 3 jesd22-c101 storage temperature [2] -40c - 85c led junction temperature [3, 4] (dc / pulse) 135c / 150c led case temperature [4] (dc / pulse) 115c / 135c led operating temperature (ambient) -30c - 85c reverse voltage luxeon flash leds are not designed to be driven in reverse bias notes for table 3: 1. peak pulsed forward current applies to t 200ms and 30% maximum duty cycle or t 500ms and 10% maximum duty cycle. 2. maximum storage temperature with rh < 85%. 3. junction temperature is based on calculation from measured led case temperature. 4. pulse conditions assume 10% duty cycle. jedec moisture sensitivity table 4. ipc/jedec j-std-20 (msl) level floor life soak requirements standard time conditions time conditions 1 unlimited [ 30c / 85% rh 168 hrs. 85c / 85% rh
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 5 forward current characteristics maximum current vs forward current pulse on-time maximum current vs led junction temperature note for figures 1 and 2: 1. peak pulsed forward current of 1500 ma applies to t on 200ms and 30% maximum duty cycle or t on 500ms and 10% maximum duty cycle. 2. peak pulsed forward current of 1000 ma applies to t on 600ms and 10% maximum duty cycle. 0 250 500 750 1000 1250 1500 1750 2000 0 200 400 600 800 1000 maximum forward current (ma) pulse length (ms) dc figure 2. 0 250 500 750 1000 1250 1500 1750 2000 0 20 40 60 80 100 120 140 160 maximum forward current (ma) t j (c ) dc
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 6 refow soldering temperature profle table 5. profle feature lead free assembly average ramp-up rate (ts max to t p ) 3c / second max preheat temperature min (ts min ) 150c preheat temperature max (ts max ) 200c preheat time (ts min to ts max ) 60 - 180 seconds temperature (t ) 217c time maintained above temperature (t ) 60 - 150 seconds peak / classifcation temperature (t p ) 260c time within 5c of actual peak temperature (t p ) 20 - 40 seconds ramp-down rate 6c / second max time 25?c to peak temperature 8 minutes max note for table 5: 1. all temperatures refer to the application printed circuit board (pcb), measured on the surface adjacent to the package body. jedec 020c
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 7 mechanical dimensions notes for figure 3: 1. drawings not to scale. 2. all dimensions in millimeters. circuit diagram figure 3. figure 4.
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 8 solder pad design notes for figure 5: 1. recommended layout for LXCL-EL05-xxxx on printed circuit board (pcb). 2. all dimensions are in millimeters. 3. all tolerances 0.05 mm. 4. solder pads are designed to achieve optimum positional accuracy using standard refow processes. 5. design should include adequate thermal heat sinking. 1.50 0.35 0.575 0.35 0.425 1.125 anode indicates location of op tical center af ter re fl ow 0.175 0.75 figure 5.
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 9 typical relative spectral distribution vs wavelength test current at 1000 ma, junction temperature = 25oc typical relative radiation pattern test current at 1000 ma, junction temperature = 25oc 0.0 0.2 0.4 0.6 0.8 1.0 380 440 500 560 620 680 740 800 relative spectral power distribution wavelength (nm) figure 6. 0.0 0.2 0.4 0.6 0.8 1.0 1.2 -90 -70 -50 -30 -10 10 30 50 70 90 relative intensity angle (degrees) figure 7.
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 10 typical light output characteristics typical relative light output vs junction temperature, test current at 1000 ma relative light output vs forward current, junction temperature = 25c note for figures 8 and 9: 1. a typical relative luminous fux of 1.0 refers to nominal conditions (see table 1). 0.75 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 0 20 40 60 80 100 relative luminous flux junction temperature (c ) figure 8. figure 9. 0.00 0.25 0.50 0.75 1.00 1.25 1.50 0 250 500 750 1000 1250 1500 1750 relative luminous flux forward current (ma )
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 11 typical forward voltage characteristics typical forward current vs forward voltage, junction temperature = 25c forward voltage shift vs junction temperature, test current at 1000 ma note for figure 11: 1. a forward voltage shift of 0.0 refers to nominal conditions (see table 2). figure 10. 0 250 500 750 1000 1250 1500 1750 2.5 2.7 2.9 3.1 3.3 3.5 3.7 forward current (ma) forward voltage (v) figure 11. -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0 20 40 60 80 100 forward voltage shift junction temperature (c )
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 12 cct shift vs forward current junction temperature = 25c note for figure 12: 1. a cct shift of 0.0 refers to nominal conditions (see table 1). -300.0 -225.0 -150.0 -75.0 0.0 75.0 150.0 0 250 500 750 1000 1250 1500 1750 ? cct (k) forward current (ma) figure 12.
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 13 color specifcations test current at 1000 ma, junction temperature = 25oc table 6. chromaticity coordinates point x y 1 0.3482 0.3856 2 0.3200 0.3613 3 0.3238 0.3054 4 0.3424 0.3211 1 2 3 4 0.29 0.31 0.33 0.35 0.37 0.39 0.41 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 y x black body curve 5000-6000k figure 13. c.i.e. 1931 chromaticity diagram.
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 14 chromaticity coordinate shift vs forward current junction temperature = 25oc color over angle test current at 1000 ma, junction temperature = 25oc notes for figure 16: 1. uv coordinates based on c.i.e. 1976 chromaticity diagram. 2. philips lumileds optimizes its phosphor composition to achieve uniform conversion of white colored light as a function of emission angle. 3. angle corresponds to the spatial radiation pattern of the emitter (see figure 7). -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 250 500 750 1000 1250 1500 1750 chromaticity coordinate shift forward current (ma) ? x ? y figure 15. 0.00 0.01 0.02 0.03 0.04 0.05 -90 -70 -50 -30 -10 10 30 50 70 90 chromaticity coordinate shift angle (degrees) ? u' ? v' figure 16.
luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. 15 emitter pocket tape packaging emitter reel packaging figure 16. tape dimensions. figure 17. emitter reel packaging.
company information philips lumileds is a leading provider of leds for everyday lighting applications. the companys records for light output, effcacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce co2 emissions and reduce the need for power plant expansion. philips lumileds luxeon ? leds are enabling never before possible applications in outdoor lighting, shop lighting, home lighting, digital imaging, display and automotive lighting. philips lumileds is a fully integrated supplier, producing core led material in all three base colors, (red, green, blue) and white. philips lumileds has r&d centers in san jose, california and in the netherlands, and production capabilities in san jose, singapore and penang, malaysia. founded in 1999, philips lumileds is the high fux led technology leader and is dedicated to bridging the gap between solid-state technology and the lighting world. more information about the companys luxeon led products and solid-state lighting technologies can be found at www philipslumileds com. luxeon flash 5 datasheet ds119 20130620 ?2013 philips lumileds lighting company. all rights reserved. luxeon is a registered trademark of the philips lumileds lighting company in the united states and other countries. www philipslumileds com www philipslumileds cn com philips lumileds lighting company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. although philips lumileds lighting company has attempted to provide the most accurate information and data, the materials and services information and data are provided as is and philips lumileds lighting company neither warranties, nor guarantees the contents and correctness of the provided information and data. philips lumileds lighting company reserves the right to make changes without notice. you as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. roh s compliant

▲Up To Search▲

Price & Availability of LXCL-EL05

	To Download LXCL-EL05 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .